Sponsler Precision Turbine Flow Meters

Home »

Products

Additional Links

Print Version

Suitable for Liquid or Gas Measurement

Materials of Construction

Meter
Materials: 304 or 316 Stainless Steel

Internals
304 or 316 Stainless Steel, 17-4pH Stainless Steel, Nickel

Design Features

High Resolution
Simple Installation
Compact Design
Low Pressure Drop
Variety of End Fittings
Wide Flow Range
Low Maintenance Cost
Available with a wide variety of outputs (Transmitters, IT400, T675)

Specifications

Type	Precision Series	Wafer Series	Sanitary Series	Low-Flo Series
Sizes	1/4" to 12"	1/2" to 4"	1/2" to 4"*	0.020" to 0.175" orifice
End Fittings	AN Flare, NPT, Flanged	Wafer, mounts between two existing flanges	Tri-clamp	AN Flare, NPT, Flanged
Flow Rates	0.5 to 12,000gpm, 0.35 to 12,000 ACFM	2.5 to 1,250gpm	0.25 to 650gpm	0.002 to 3gpm
Temperatures	-430° to 450° F; +1000°F optional (-256.7°C to 232.2°C; 537.8°C optional)	-430° to 450° F; +1000°F optional (-256.7°C to 232.2°C; 537.8°C optional)	-100° to 450° F; (-73.3°C to 232.2°C; 537.8°C)	-430° to 450° F; +1000°F optional (-256.7°C to 232.2°C; 537.8°C optional)
Accuracy	+/-0.5% linear, (capable of +/-0.25% or +/-0.15%)	+/-1.0% Linear	+/-0.5% Linear	See repeatability
Repeatability	+/-0.02%	+/-0.1%	+/-0.1%	+/-0.25%

*3A approved 1/2" through 4"

Literature

Product Overview
Turbine Meters
Sponsler
Cryogenic Services
CIM100 Low Cost 1" turbine meter

The Sponsler Turbine meter is provided with a pick-up coil which provides an AC Sine-wave output. This signal can be converted easily to a pulse, voltage or 4-20mA output utilizing one of our transmitters. If a local display is required, the IT400 offers a rate, total and non-resettable totalizer. It is also standard with a pulse output and a 4-20mA output to communicate with an external device.. The T675 was designed around cryogenic transport requirements and is loaded with the corresponding tables to serve this industry.

Print Version